Consolidating rotten wood any nigeria dating site

An exterior door that doesn’t have a coating of paint or other protection may eventually begin to show signs of rot.

consolidating rotten wood-21

You can complete the repair process using basic tools you probably already own.

Scrape away any loose paint with a putty knife or paint scraper to make it easier to see where you need to make the repairs.

Poke around on the surface of the exterior door, using a sharp object like an awl or screwdriver, to identify where the wood has rotted.

Pull off any damaged wood that you can to make the repair easier.

Mix two-part wood hardener, according to package directions, in a small squeeze bottle that has a nozzle small enough to fit into the 1/4-inch holes.

Squeeze the wood hardener into the holes you drilled. Do not let stick A touch the hardener or stick B touch the resin.Use a small paintbrush to spread the hardener across the damaged open areas. Place a golf-ball sized piece of epoxy resin on a piece of scrap plywood with stick A. Put an equal amount of hardener beside the first amount with stick B. Use a separate stirring stick to mix the two pieces of epoxy together.Saturate the wood that needs repair with the hardener. Push the epoxy wood filler into the holes you drilled into the door using a putty knife.Its purpose is to consolidate and seal the wood fibers together and to help prevent any further water damage or rot. This may take as long as seven days, depending on the product you select. Smooth additional wood filler into any open areas on the exterior door.Cover the door with plastic sheeting to keep it dry during rain showers if you are doing the work in an uncovered area. It’s better to have too much filler in the holes at this point than not enough.Allow the filler to harden four hours or overnight.

Tags: , ,